Allied Telesis AT-S24 - Manual (Page 66)

Configuring the Ports
66
Displaying Port Status
The Port Status window displays the current operating status of all the
ports on the switch, including the ports on any expansion modules, if
installed. The window allows you to quickly ascertain the operating
status of the ports by displaying a variety of information, such as
whether a link exists between the ports and the end nodes, and whether
any of the ports have been manually disabled.
To display the status of the ports on a switch, perform the following
procedure:
1. From the Omega Main Menu, select Port Status and Configuration.
The Port Status window in Figure 25 is displayed.
Figure 25 Port Status Window
The Port Status window contains the following information:
Port
This column displays the number and name of each port, if you have
assigned names. You can assign names to the ports to make them
easier to identify. For instructions on assigning port names, refer to
the section Configuring Port Parameters on page 68.
The standard twenty four ports that come with the AT-8224XL switch
are numbered 1 through 24. The standard sixteen ports that come
with the AT-8216FXL and AT-8288XL switches are numbered 1
through 16.