Allied Telesis AT-S24 - Manual (Page 121)

AT-S24 Version 2.01 User’s Guide
121
Phase 2
If you added one or more untagged ports to the VLAN, you must
removed the ports from their current VLAN assignment; otherwise the
untagged ports will be members of more than one VLAN. This procedure
is explained in Creating a Port-based or Tagged VLAN, Phase 2 on
page 113.
If you removed any untagged ports from the VLAN, you must manually
reassign them to another VLAN. This involves modifying the VLAN to
which you want to reassign the untagged ports. This is accomplished by
displaying the VLAN Configuration window of the VLAN and modifying
the All Ports in VLAN field. Additionally, if you are reassigning the ports
to a VLAN other than the Default VLAN, you must also change the ports’
PVIDs to match the VLAN’s VID. This is accomplished by using the Port to
VLAN Configuration menu selection. This menu selection is explained in
the procedure Creating a Port-based or Tagged VLAN, Phase 3 on
page 114.
Phase 3
If you added untagged ports to the VLAN, you must change the PVIDs of
the ports to match the VID of the VLAN. This is explained in the
procedure in Creating a Port-based or Tagged VLAN, Phase 3 on page
114.