Allied Telesis AT-S63 - Manual (Page 665)

AT-S63 Management Software Command Line Interface User’s Guide
Section VIII: Management Security 665
DESTROY MGMTACL
Syntax
destroy mgmtacl id= value
Parameters
id Specifies the identification number of the ACE to be
deleted.
Description
This command deletes an ACE from the Management ACL. You specify
the ACE by its identification number, which is displayed with “SHOW
MGMTACL” on page 670.
Note
If you are remotely managing the switch from a Telnet management
session and the Management ACL is active, your management
session will end and you will be unable to reestablish it if you delete
the ACE that specifies your management workstation.
Example
The following command deletes the ACE with the identification number 18
from the Management ACL:
destroy mgmtacl id=18