Allied Telesis AT-S63 - Manual (Page 577)

577
Chapter 34
802.1x Port-based Network Access
Control Commands
This chapter contains the following commands:
ˆ “DISABLE PORTACCESS|PORTAUTH” on page 578
ˆ “DISABLE RADIUSACCOUNTING” on page 579
ˆ “ENABLE PORTACCESS|PORTAUTH” on page 580
ˆ “ENABLE RADIUSACCOUNTING” on page 581
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR”
on page 582
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT” on
page 590
ˆ “SET RADIUSACCOUNTING” on page 592
ˆ “SHOW PORTACCESS|PORTAUTH” on page 594
ˆ “SHOW PORTACCESS|PORTAUTH PORT” on page 596
ˆ “SHOW RADIUSACCOUNTING” on page 599
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 31,
“802.1x Port-based Network Access Control” in the AT-S63
Management Software Menus Interface User’s Guide.