Allied Telesis AT-S63 - Manual (Page 65)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 65
SET TELNET INSERTNULL
Syntax
set telnet insertnull=on|off
Parameters
insertnull Controls whether a NULL character is inserted after each CR
sent by the Telnet server to the remote client. Options are:
on Sends a NULL character after each CR sent to the
remote client.
off Specifies that no NULL character is sent to the
remote client. This is the default setting.
Description
You can use this command to toggle the Telnet server on the switch to add
a NULL character after each CR for those Telnet clients that require the
character in order to display the information correctly. The default setting
on the switch is to not send the NULL character after a CR. To view the
current setting, see “SHOW SWITCH” on page 76.
Example
This command configures the switch to send a NULL character after each
CR during a Telnet management session:
set telnet insertnull=on