beautypg.com

Enable portaccess|portauth – Allied Telesis AT-S63 User Manual

Page 580

background image

Chapter 34: 802.1x Port-based Network Access Control Commands

580

Section VII: Port Security

ENABLE PORTACCESS|PORTAUTH

Syntax

enable portaccess|portauth

Note

The PORTACCESS and PORTAUTH keywords are equivalent.

Parameters

None.

Description

This command activates 802.1x Port-based Network Access Control on
the switch. The default setting for this feature is disabled.

Note

You should activate and configure the RADIUS client software on
the switch before activating port-based access control. Refer to
“SET AUTHENTICATION” on page 658.

Example

The following command activates 802.1x Port-based Network Access
Control on the switch:

enable portaccess