Allied Telesis AT-S63 - Manual (Page 223)

AT-S63 Management Software Command Line Interface User’s Guide
Section II: Advanced Operations 223
SHOW FILE
Syntax
show file[=[cflash:] filename.ext ]
Parameter
file Specifies the name of the file to be displayed. Use
double quotes to enclose the name if it contains
spaces. Otherwise, the quotes are optional. To view a
file on a flash memory card, precede the name with
“cflash”.
If you do not specify a file name, the command
displays a list of all files in flash memory as well as on
the compact flash card.
Description
This command displays a list of the files in the switch’s file system. You
can use the wildcard “*” to replace any part of the filename to allow a more
selective display.
You can also use this command to view the contents of a configuration file.
Examples
The following command displays all the files in the switch’s file system and
the current directory of the flash memory card:
show file
The following command displays all the configuration files on the switch:
show file=*.cfg
The following command displays the contents of the configuration file
sw12.cfg in the switch’s file system:
show file=sw12.cfg
The following command displays the contents of the configuration file
boot.cfg on a compact flash card:
show file=cflash:boot.cfg