beautypg.com

Set ip route – Allied Telesis AT-S63 User Manual

Page 60

background image

Chapter 3: Basic Switch Commands

60

Section I: Basic Operations

SET IP ROUTE

Syntax

set ip route ipaddress=

ipaddress

Parameter

ipaddress

Specifies the IP address of the default gateway for
the switch.

Description

This command specifies the IP address of the default gateway for the
switch. This IP address is required if you intend to remotely manage the
device from a remote management station that is separated from the unit
by a router. To display the current gateway address, refer to “SHOW IP
INTERFACE” on page 74.

Example

The following command sets the default gateway to 140.35.22.12:

set ip route ipaddress=140.35.22.12

See also other documents in the category Allied Telesis Computer hardware: