Allied Telesis AT-S63 - Manual (Page 154)

Chapter 8: Port Statistics Commands
154 Section I: Basic Operations
SHOW SWITCH PORT COUNTER
Syntax
show switch port= port counter
Parameter
port Specifies the port whose statistics you want to view.
You can specify more than one port at a time. To view
all ports, do not specify a port.
Description
This command displays the operating statistics for a port on the switch.
Examples of the statistics include the number of packets transmitted and
received, and the number of CRC errors. For an example of the display
and definitions of the statistics, refer to “SHOW SWITCH COUNTER” on
page 151.
Examples
The following command displays the operating statistics for port 14:
show switch port=14 counter
The following command displays the operating statistics for all ports:
show switch port counter