Allied Telesis AT-S63 - Manual (Page 174)

Chapter 10: Static Port Trunking Commands
174 Section I: Basic Operations
SET SWITCH TRUNK
Syntax
set switch trunk= name
select=macsrc|macdest|macboth|ipsrc|ipdest|ipboth
Parameters
trunk Specifies the name of the static port trunk.
select Specifies the load distribution method. Options are:
macsrc Source MAC address.
macdest Destination MAC address.
macboth Source address/destination MAC
address.
ipsrc Source IP address.
ipdest Destination IP address.
ipboth Source address/destination IP
address.
Description
This command changes the load distribution method of an existing static
port trunk.
Example
The following command changes the load distribution method of a trunk
named “Load11” to source MAC address:
set switch trunk=Load11 select=macsrc