Allied Telesis AT-S63 - Manual (Page 544)

Chapter 30: GARP VLAN Registration Protocol Commands
544 Section VI: Virtual LANs
SHOW GARP GIP
Syntax
show garp=gvrp gip
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S63
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the GIP-connected
ring for the GARP application:
ˆ GARP Application
ˆ GIP contact
ˆ STP ID
Example
The following command displays the GIP-connected ring for all GARP
applications:
show garp=gvrp gip