Allied Telesis AT-S63 - Manual (Page 137)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 137
frames. This is the
default. These options
are equivalent.
Description
This command discards ingress and egress broadcast packets as well as
unknown unicast and multicast packets on a port. When you activate this
feature on a port, the port discards all ingress or egress packets of the
type specified. The default setting for each type of packet filter is disabled.
Examples
The following command activates the ingress broadcast filter on ports 4
and 23 so that the ports discard all ingress broadcast packets:
set switch port=4,23 bcastfiltering=yes
The following command activates the unknown egress multicast and
unicast filters on ports 3 and 6 so that the ports discard all unknown egress
multicast and unicast packets:
set switch port=3,6 unkmcastegressfiltering=yes
unkucastegressfiltering=yes
This comand disables the unknown ingress unicast filter on port 24 so that
the port again accepts all unknown ingress unicast packets:
set switch port=24 unkucastfiltering=no