Allied Telesis AT-S63 - Manual (Page 594)

Chapter 34: 802.1x Port-based Network Access Control Commands
594 Section VII: Port Security
SHOW PORTACCESS|PORTAUTH
Syntax
show portaccess|portauth=8021x|macbased
Parameters
portaccess or Specifies the authenticator method of the
portauth port. Options are:
8021x Displays information for an 802.1x
authenticator port.
macbased Displays information for a MAC address-
based authenticator port.
config Displays whether port-based access control is
enabled or disabled on the switch.
status Displays the role and status of each port.
Description
This command displays the port roles. Figure 56 is an example of the
information displayed by this command.
Figure 56. SHOW PORTACCESS|PORTAUTH Command
802.1x Authentication Information
---------------------------------------------------
SystemAuthControl.................. Disabled
Number of 802.1x Supplicants....... 0 (480)
Port Role Supplicant Protocol
Mode Version
---------------------------------------------------
1
Authenticator Single 1
2 Authenticator Single 1
3 Authenticator Single 1
4 Authenticator Single 1
5 Authenticator Single 1
6 Authenticator Single 1
7 Authenticator Single 1
8 Authenticator Single 1