Allied Telesis AT-S63 - Manual (Page 559)

AT-S63 Management Software Command Line Interface User’s Guide
Section VI: Virtual LANs 559
ADD VLAN PORT MACADDRESS
Syntax
add vlan= name | vid port= ports macaddress|destaddress= mac-
address
Parameters
vlan Specifies the name or VID of the VLAN to be modified.
port Specifies the egress port(s) to assign to the MAC
address. You can specify more than one egress port.
macaddress or Specifies the MAC address to be assigned the egress
destaddress port(s). The MAC address can be entered in either of
the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
Description
This command assigns egress ports to a MAC address in a MAC address-
based VLAN. The MAC address must already be in the VLAN before you
can assign it egress ports. To assign a MAC address to a VLAN, refer to
“ADD VLAN MACADDRESS” on page 558.
Examples
The following command assigns ports 1 and 4 as egress ports for the MAC
address 00:30:84:32:8A:5D in the Sales VLAN:
add vlan=sales port=1,4 macaddress=00:30:84:32:8a:5d
The following command assigns port 11 to 14 as egress ports for the MAC
address 00:30:84:75:11:B2 from the VLAN with the VID 24:
add vlan=24 port=11-14 macaddress=00:30:84:75:11:b2