Allied Telesis AT-S63 - Manual (Page 177)

177
Chapter 11
LACP Port Trunking Commands
This chapter contains the following commands:
ˆ “ADD LACP PORT” on page 178
ˆ “CREATE LACP AGGREGATOR” on page 179
ˆ “DELETE LACP PORT” on page 181
ˆ “DESTROY LACP AGGREGATOR” on page 182
ˆ “DISABLE LACP” on page 183
ˆ “ENABLE LACP” on page 184
ˆ “SET LACP AGGREGATOR” on page 185
ˆ “SET LACP SYSPRIORITY” on page 187
ˆ “SET LACP STATE” on page 188
ˆ “SHOW LACP” on page 189
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on LACP port trunks,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.