Allied Telesis AT-S63 - Manual (Page 493)

AT-S63 Management Software Command Line Interface User’s Guide
Section V: Spanning Tree Protocols 493
DELETE MSTP
Syntax
delete mstp mstiid= mstiid mstivlanassoc= vids
Parameters
mstiid Specifies the MSTI ID of the spanning tree instance
where you want to remove VLANs. You can specify
only one MSTI ID at a time. The range is 1 to 15.
mstivlanassoc Specifies the VID of the VLAN you want to remove from
the spanning tree instance. You can specify more than
one VID at a time (for example, 2,5,44).
Description
This command removes a VLAN from a spanning tree instance. A VLAN
removed from a spanning tree instance is automatically returned to CIST.
The MSTIID parameter specifies the MSTI ID.
The MSTIVLANASSOC parameter specifies the VIDs of the VLANs you
want to remove from the spanning tree instance.
Examples
The following command deletes the VLAN with the VID 4 from MSTI ID 8:
delete mstp mstiid=8 mstivlanassoc=4
The following command deletes the VLANs with the VIDs 24 and 44 from
MSTI ID 11:
delete mstp mstiid=11 mstivlanassoc=24,44