Allied Telesis AT-S63 - Manual (Page 16)

Preface
16
How This Guide is Organized
This guide is organized into the following sections
ˆ Section I: Basic Operations
The chapters in this section contain the commands for performing a
variety of basic operations, such as configuring a switch’s IP
configuration, setting port parameters, and using enhanced stacking.
ˆ Section II: Advanced Operations
The chapters in this section contain the commands for performing
different advanced operations, such as managing the file system,
uploading and downloading files, using the event log, and working with
classifiers and Quality of Service.
ˆ Section III: IGMP Snooping, MLD Snooping, and RRP Snooping
The chapters in this section contain the commands for configuring
IGMP snooping, MLD snooping, and RRP snooping.
ˆ Section IV: SNMPv3
The chapter in this section contains the commands for configuring
SNMPv3.
ˆ Section V: Spanning Tree Protocols
The chapters in this section contain the commands for configuring the
Spanning Tree, Rapid Spanning Tree, and Multiple Spanning Tree
Protocols.
ˆ Section VI: Virtual LANs
The chapters in this section contain the commands for configuring
port-based and tagged VLANs, GVRP, protected ports VLANs, MAC
address-based VLANs, and multiple VLAN modes.
ˆ Section VII: Port Security
The chapters in this section contain the commands for configuring
MAC address-based security and 802.1x port-based network access
control.
ˆ Section VIII: Management Security
The chapters in this section contain the commands for managing the
web server, encryption keys, Public Key Infrastructure certificates,
Secure Shell, TACACS+ and RADIUS, and the management access
control list.