beautypg.com

Allied Telesis AT-SBx81CFC960 User Manual

Page 187

background image

SwitchBlade x8106 Chassis Switch and AT-SBx81CFC960 Card Installation Guide

Section II: Installing the Chassis

187

Figure 129. Stripping the Power Wires

Note

You must use stranded wires with the terminal lugs. You may not
use solid wires.

2. Insert the power wires into the terminals included with the power

supply and use a crimping tool to secure the wires to the terminals.
See Figure 130.

Figure 130. Attaching the Power Wires to the Straight Terminal Lugs

3. Verify that the On/Off switch on the AT-SBxPWRSYS1 DC Power

Supply is in the Off position. Refer to Figure 131 on page 188.

This manual is related to the following products: