Allied Telesis AT-SBx81CFC960 User Manual
Page 170
Chapter 8: Installing the Transceivers and Cabling the Ports
170
Section II: Installing the Chassis
Figure 112. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx81CFC960 Controller Fabric Card
7. Repeat this procedure to install additional SFP+ transceivers in the
AT-SBx81CFC960 Controller Fabric Card.
After cabling the SFP+ transceivers in the AT-SBx81CFC960 Controller
Fabric Card, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 171.
This manual is related to the following products: