Campbell Scientific CR10X Measurement and Control System - Manual (Page 192)

SECTION 12. PROGRAM CONTROL INSTRUCTIONS
12-10
*** 111 RUN PROGRAM FROM FLASH ***
FUNCTION
This instruction is used to load a program
stored in FLASH into RAM. The program in
RAM is replaced by the Flash program specified
in Parameter 1. If Parameter 1 is indexed, the
CR10X will compile the program like the
∗6
mode. Use this instruction with caution.
NOTE: The memory allocation (
∗A) must
be the same between the program in RAM
and the program that is loaded from Flash.
If the memory allocations are not the same,
the CR10X will reallocate memory and the
data in Final Storage will be lost. Do not
use the auto program allocation (0 for
Parameter 5 in the
∗A mode), because data
will be lost.
PARAM. DATE
NUMBER TYPE DESCRIPTION
01: 2 Flash program number
(name)
*** 119 TDR100 ***
FUNCTION
Controls the SDMX50 multiplexers and the
TDR100. See TDR100 manual for details.
*** 120 TGT1 TELONICS GOES ***
FUNCTION
This instruction is used to transmit data from
CR10X Final Storage via a GOES satellite to a
central ground station. See the TGT1 manual
for information on Instruction 120.
*** 121 ARGOS ***
FUNCTION
This instruction is used to transmit data from
CR10X Final Storage via an ARGOS satellite.
See the ARGOS Interface Notes for information
on Instruction 121.
*** 122 INMARSAT-C ***
FUNCTION
This instruction is used to transmit data from
CR10X Final Storage and receive data via the
Galaxy INMARSAT - C satellite transceiver.
See the INMARSAT-C interface notes for
information on Instruction 122.
*** 123 Automatic Programming of a TGT1 ***
FUNCTION
Instruction 123 performs Automatic
Programming of TGT1 GOES Transmitter. See
the TGT1 manual for information on Instruction
123.
*** 124 Fire Data to HDR GOES ***
FUNCTION
Transfers FireWeather format data to SAT HDR
GOES transmitter. See SAT HDR GOES
manual for details.
*** 125 Argos SDC ***
FUNCTION
Sends data to the SAT SDC/Argos transmitter for
transmission to an Argos satellite. See the Argos
transmitter manual for more information.
*** 126 Transfer Data to HDR GOES ***
FUNCTION
Transfers data to SAT HDR GOES transmitter.
See SAT HDR GOES annual for details.
*** 127 HDR GOES Status ***
FUNCTION
Retrieves status from SAT HDR GOES
transmitter. See SAT HDR GOES manual for
details.