Campbell Scientific CR10X Measurement and Control System - Manual (Page 182)

SECTION 11. OUTPUT PROCESSING INSTRUCTIONS
11-8
Execution time: 6.5 - 7.0 ms, with 60 Amplitude
Bins and one Mean Bin.
Intermediate Storage locations required: Reps
x (Bins+2 x [No. of Amplitude Bins] + 4), where
Bins = No. Mean Bins x No. Amplitude Bins.
Outputs Generated: No. Mean Bins x No.
Amplitude Bins x Reps
*** 82 STANDARD DEVIATION IN TIME ***
FUNCTION
Calculate the standard deviation (STD DEV) of
a given input location. The standard deviation
is calculated using the formula:
S = (( ΣX
i
2 - ( ΣX
i
) 2 /N)/N)1/2
where X
i
is the ith measurement and N is the
number of samples.
PARAM. DATA
NUMBER TYPE DESCRIPTION
01: 2 Repetitions
02: 4 Starting input location no.
Outputs Generated: 1 per repetition