Horner APG XL4 OCS HE-ETN300 - Manual (Page 91)

SUP0740-07 CH.13
11/30/2009 Page 91 of 98 # 958
CHAPTER 13: ASCII over TCP/IP
13.1 Overview
This protocol is designed to send and receive ASCII data over Ethernet port of the controllers.
Controller acts as a server while using this protocol.
Minimum version requirements for ASCII over TCP/IP feature:
- Firmware 12.6
- Cscape 9
13.2 Configuration
a. Open CSCAPE and click on menu option. Select a controller with Ethernet port.
b. Click on Config button for Ethernet.
Figure 13.1 – Hardware Configuration
Click
Here