Horner APG XL4 OCS HE-ETN300 - Manual (Page 48)

CH.6 SUP0740-07
11/30/2009 Page 48 of 98 # 958
Figure 6.15 – Creating Produced Exchange 2 - Node 2
3. Click on the Add Range button, in the EGD Configuration dialog, to define a Data Block for
Produced Exchange 2. Then fill in the parameters, as shown in Figure 6.16 below, and click
OK.
In this example, Node 2 will use Exchange 2, to transmit 5 words of data taken from %R100
through %R104.
Figure 6.16 – Produced Exchange 2 Data Block Definition – Node 2
At this point, the Produced Exchanges tab in the EGD Configuration dialog should be as
shown in Figure 6.17.