Horner APG XL4 OCS HE-ETN300 - Manual (Page 43)

SUP0740-07 CH.6
11/30/2009 Page 43 of 98 # 958
Figure 6.8– Creating Produced Exchange 1 - Node 1
3. Click on the Add Range button, in the EGD Configuration dialog, to define a Data Block for
Produced Exchange 1. Then fill in the parameters, as shown in Figure 6.9 below, and click
OK.
In this example, Node 1 will use Exchange 1, to transmit 10 words of data taken from %R100
through %R109.
Figure 6.9– Produced Exchange 1 Data Block Definition – Node 1
At this point, the Produced Exchanges tab in the EGD Configuration dialog should be as
shown in Figure 6.10.