Horner APG XL4 OCS HE-ETN300 - Manual (Page 87)

SUP0740-07 CH.12
11/30/2009 Page 87 of 98 # 958
Figure 12.8 – Message/E-Mail Configuration
Email Message Configuration
Trigger Variable
Settings An event is needed to trigger an Email communication from the
controller to the member(s) of a Group. Enter a bit reference in the
Address field that (when set to HIGH) causes the Email message
associated with the trigger to be sent to the specified Group
member(s). An I/O name can be entered or selected in the Name
field.
On successful transmission of email, the trigger bit is made low by
firmware. In case of error in transmission, the status register is
updated and firmware keeps on trying to send email till trigger bit is
made low by the user.
Message/EMail
Attributes
Enter or select the group that the Email message is sent to.