Horner APG XL4 OCS HE-ETN300 - Manual (Page 83)

SUP0740-07 CH.12
11/30/2009 Page 83 of 98 # 958
SMTP Server
SMTP Server IP:
The SMTP Server IP address of the email service provider needs
to be provided here. In case SMTP server IP needs to be
obtained from DNS server, select Obtain SMTP Server IP
Address from DNS Server checkbox. This will enable DNS
Server IP and SMTP Server Name edit-boxes. Configure these
with the information provided by email service provider.
Port:
The default port for email configuration is set to 25 but can be
changed by user if required.
If ‘Get Settings from Register’ is checked:
DNS Server IP and SMTP Server IP needs to be provided in 32-
bit IP format in the defined register location.
Port number needs to be provided in 16-bit numeric format at the
defined register location.
SMTP Server Name (if required) needs to be provided at the
register mentioned followed by null termination or space.
SMTP Authentication
The firmware for E-Mail also supports Login type of SMTP
authentication. To use this feature, the Authentication SMTP
checkbox should be checked. The username and password for
authentication needs to be provided here. (TSL/SSL authentication
servers are not supported)
If ‘Get Settings from Register’ is checked:
User Name and Password needs to be provided at the register
location mentioned followed by null termination or space.
C. Email Message Configuration
C.1. Email Directory
Before creating Send Emails, a directory of email addresses needs to be created. Click on E-Mail
Directory button to configure email addresses.
Email address configuration is very similar to SMS Address configuration with email addresses
replacing phone numbers.