Alliance Laundry Systems 160 User Manual

Page 29

PowerFlex 40 and 400 Drive Control Logic

F232120

Table 16

Table 16 (continued)

PowerFlex 40

Parameter

Group and

Number

PowerFlex 400 Parameter Group

and Number

Parameter

Description

Function

A193

N/A

Counter

This counter will increment each time
parameter A192 changes. This is
intended as a quick reference to show if
any parameter has been changed after
factory programming, even if a
parameter was changed and then
restored to the ALS-specified value.

NOTE: The above parameters and descriptions are based on firmware version 90.06 and may differ or be missing
from earlier versions of PowerFlex drive firmware. Refer to parameter d016 for the firmware's version.

NOTE: All PowerFlex drives used in Alliance Laundry Systems' equipment are custom-developed with unique
features and parameters. Parameter information provided within the Allen-Bradley PowerFlex series AC drive
manual will differ and may not be relevant.

This manual is related to the following products:

1336 1305