Outback Power Systems FLEXmax 80 Owners Manual - Manual (Page 57)

Operation
900-0009-01-00 Rev C 55
Stats
The STATS screen in the main menu displays additional voltage and time information. In a stand-alone FLEXmax
controller — one that is not connected to a system display — Sunrise shows how long ago the FLEXmax woke
up for the first time each day and when the daily and total logged values were updated and cleared. If the
FLEXmax is connected to a system display, the logging occurs at midnight.
Figure 49 STATS Mode
To view the STATS screen:
1. From the main menu, press <> to move the arrow
next to STATS.
2. Press to advance to the statistics screens.
 Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT
  GO
Main Menu
Charger Aux Light
EQ Misc Advanced
Logging  Stats
EXIT   GO
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000 Sunrise
EXIT NEXT 01:30:33
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000 Sunrise
EXIT NEXT 01:30:33
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000 Sunrise
EXIT NEXT 01:30:33
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000 Sunrise
EXIT NEXT 01:30:33
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000 Sunrise
EXIT NEXT 01:30:33
Max Bat Voc MaxVoc
14.9 036.6 133.0
MaxWatt 0000
Sunrise
EXIT NEXT 01:30:33
Maximum historical battery voltage
occurring on the FLEXmax
Daily high Voc value
The highest historical
Voc occurring on the
FLEXmax.
Maximum wattage
seen by the FLEXmax
The time the logs were
cleared and reset
Press to view the second STATS screen.