Outback Power Systems FLEXmax 80 Owners Manual - Manual (Page 20)

Operation
18 900-0009-01-00 Rev C
End-of-Day Summary Screen
The end-of-day summary screen appears after one hour of continuous Sleeping (see page 23). This
screen can be opened any time by pressing the second soft key while in the status screen, providing a
summary up to that point.
Figure 12 End-of-Day Summary Screen
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
End-of-Day Screen
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp
00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap
0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Day (up to 128 days)
Accumulated
Amp-hours
Accumulated kWh
Total Power
Peak Input Voltage
Peak Output Current
Peak Output Power
in Kilowatts
Maximum Battery
Voltage Obtained
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V
FLT 00:00
Minimum Battery
Voltage Obtained
Accumulated
Float Time
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V
ABS 01:00
MIN 14.6 V FLT 00:00
Accumulated
Absorb Time
NOTE:
When finished viewing the
end-of-day screen(s), be sure to
return the display to the status
screen. Otherwise, it will not reset
the counters when the sun rises the
next morning. The values will
continue to accumulate.