Outback Power Systems FLEXmax 80 Owners Manual - Manual (Page 21)

Operation
900-0009-01-00 Rev C 19
Navigating the End-of-Day Screens and Data Logging
Figure 13 Navigating the End-of-Day Summary Screen
CLEAR LOG
BACK TOTL DAILY
The daily statistics or the accumulated
statistics are stored on the charge controller's
static memory. A new log “day” begins when
the controller enters Wakeup. (See page 24.)
Logs accumulate for up to 128 days. See
pages 75 and page 76 for details.
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Press SK1 to return to the
status screen.
Press SK2 to open the
CLEAR LOG screen.
Press SK3 to open the previous
day’s summary screen.
Continuing to press this soft key
will cycle back through the last
128 daily summary screens.
Pressing SK4 will bring up
the summary for the 128
th
day back.
Pressing the second soft key
(SK2) opens the end-of-day
summary menu/logging.
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Status Screen End-of-Day Screen
Are you sure?
NO YES
OR
OR
CLEAR LOG Screen
End-of-Day Screen
End-of-Day Screen
End-of-Day Screen
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
Press SK1 to return to the
status screen.
End-of-Day Screen
This data log can be downloaded to an SD
card. The MATE3 system display is required
for this download. See page 69 for details on
this feature.