Outback Power Systems FLEXmax 80 Owners Manual - Manual (Page 27)

Operation
900-0009-01-00 Rev C 25
Main Menu Map
Figure 17 Main Menu
From the main menu, a user can choose among the
following FLEXmax functions by aligning the arrow
next to the desired selection.
 Charger—CHARGER SETUP
Adjusts the Current Limit, Absorbing,
and Float recharging voltage set points.
See page 26 for details.

Aux —AUX OUTPUT CONTROL
Provides a secondary control circuit for a vent fan,
error alarm, and other system-related additions.
See page 27 for details.
 Light—BACKLIGHT CONTROL
Adjusts the backlighting of LCD screen and soft
key buttons.
See page 41 for details.

EQ —BATTERY EQUALIZE
Activates battery equalization recharging
(manually or automatically).
See page 42 for details.

Misc —MISCELLANEOUS
Additional settings and service information.
See page 44 for details.

Advanced —ADVANCED MENU
Optimizes/fine-tunes the charge controller.
See page 46 for details.
 Logging—DATA LOGGING
Displays recorded power production information.
See page 54 for details.

STATS —STATISTICS
Displays recorded peak system information and
cumulative kilowatt-hours and amp-hours.
See page 55 for details.
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT
  GO
Main Menu
Charger
Aux
Light
EQ Misc Advanced
Logging Stats
EXIT
  GO
Charger
Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT
  GO
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Charger Aux Light
EQ Misc Advanced
Logging
Stats
EXIT   GO
returns to the Status screen.
<> moves the cursor to the left.
<> moves the cursor to the right.
goes to the setup screen for the
chosen option.