HP OneView for VMware vCenter - Manual (Page 65)

HP Storage Provisioned to Cluster
•
Volumes—Number of volumes available to the cluster from configured HP storage arrays and
whether any are thin-provisioned
•
HP Storage Provisioned—Amount of storage available to the cluster from configured HP storage
arrays
•
HP Storage Used—Amount of storage from configured HP storage arrays that is used by the
cluster
NOTE: The HP Storage Used value can differ from the HP Storage Provisioned value if thin
provisioning or demand-allocated snapshots are used.
•
HP Storage ThP Savings—Amount of storage saved through the use of array-based thin
provisioning
•
Volumes overprovisioned—Number of over-provisioned volumes
Provisioned from Cluster to Virtual Machines
•
Datastores overprovisioned—The number of over-provisioned datastores
•
Cluster Provisioned Capacity—Total amount of storage available to the cluster, including HP
storage, local storage, and unmanaged disks
•
Cluster Used Capacity—Amount of storage used by the cluster
•
Cluster Available Capacity—Amount of unused storage available to the cluster
HP Storage Arrays
This section lists the arrays that present disks to the selected cluster. For each array, move the cursor
over the status bar to view storage information.
The following information is displayed for each array:
•
Volumes—Number of volumes presented to the selected cluster from the array
•
Used—Amount of storage used by the cluster from the array.
•
Total—Total amount of storage presented to the selected cluster from the array
•
% Savings—Amount of storage saved through the use of array-based thin provisioning
Datastores
This section lists the datastores provisioned from the selected host to VMs. For each datastore,
move the cursor over the status bar to view storage information.
The following information is displayed for each datastore:
•
Virtual disks—Number of virtual disks on datastores provisioned from the selected host to VMs
•
Total—Amount of storage provisioned on the host as virtual disks (VMDKs or RDMs)
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware thin provisioning
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—The amount of data stored on the service set by the services on the service set.
•
Total—Total amount of storage on the service set.
•
Deduplication Ratio—The deduplication ratio of data stored on the service set.
Using the Storage Module for vCenter 65