HP Designjet 5100 Printer series - Manual (Page 80)

5-12
Front-panel messages
HP Designjet 5100 printer Customer Reference Guide
Ink cartridge error messages
Status code
XX ranges from
60 - 85
Ink cartridge message
description
Procedure
XX02 Reseat The ink cartridge may be
badly seated. An electrical
connection is faulty.
1. Remove the ink cartridge and re-
insert.
2. Replace the ink cartridge.
XX03 Replace The ink cartridge has an air
leak that prevents the ink
pumping to the printer.
1. Remove the ink cartridge and re-
install.
2. Replace the ink cartridge
XX04 Replace The smart chip inside the ink
cartridge contains incorrect
information. The error detected
means that you cannot
continue to use this ink
cartridge.
XX05 Replace
The printer has detected an
incorrect ink cartridge
Ensure it is an HP 705 cartridge and
that it is installed into the correct
position.
XX06 Replace The printer detects that the ink
cartridge does not match the
rest of the ink system already
installed.
Ensure that the printheads and the ink
cartridges are HP 705.
XX08 Unknown Use genuine HP components
for excellent image quality
from your printer. If you choose
to continue printing with this
ink supply you may not have a
properly functioning or reliable
ink level indicator. The solid
bar showing the ink level will
be replaced by a patterned
bar. You may not know when
the ink supply is running low
or empty. Printing with an
empty ink supply may seriously
damage your printhead, ink
tubes, and printer. Any
damage resulting from use of
this supply or non-HP ink is not
covered under your printer
warranty.
Select Yes to replace your cartridge
with a genuine HP 705 cartridge, No
to continue.