HP Designjet 5100 Printer series - Manual (Page 72)

5-4
Front-panel messages
HP Designjet 5100 printer Customer Reference Guide
HP is not
responsible for
damage from use
of non-HP ink
Select YES to
replace
Use genuine HP components
for excellent image quality
from your printer. If you choose
to continue printing with this
ink supply you may not have a
properly functioning or reliable
ink level indicator. The solid
bar showing the ink level will
be replaced by a patterned
bar. You may not know when
the ink supply is running low
or empty. Printing with an
empty ink supply may seriously
damage your printhead, ink
tubes, and printer. Any
damage resulting from use of
this supply or non-Hewlett-
Packard ink is not covered
under your printer warranty.
Select Yes to replace your cartridge
with a genuine HP 705 cartridge, No
to continue.
See the “Using Your Printer CD”.
Initializing printer
Please wait. %
The printer needs about ten
minutes to initialize the system
completely.
You can put the printer into sleep
mode, which will return to Ready
status much quicker. See the 7, in
section use the front panel on the
reverse of this guide.
Ink drying, please
wait
Printing has finished, but the
ink still needs some time to
dry.
To adjust the drying time settings, see
the “Using Your Printer CD”.
Ink tube
maintenance
advised
The internal ink system tubes
need replacing.
The ink system tubes have reached the
end of their useful life. Please replace
them before they break and damage
the printer.
Ink tube
maintenance
required now
The need to change the ink
tubes may affect the
performance of the printer.
The ink system tubes have reached the
end of their useful life. Please replace
them before they break and damage
the printer.
Insert There is no consumable
installed.
Insert the correct printhead(s) into the
carriage assembly. Check the
interconnect to see if they need
cleaning. See carriage interconnect
wiper, on page 56.
Insert cleaner The printhead cleaners are
located on the right-hand side
of the printer.
Insert ink cartridges This is an ink cartridge
installation message.
See 67, in section maintain the ink
system on the reverse of this guide.
Status Description Procedure