HP Designjet 5100 Printer series - Manual (Page 77)

5-9
Front-panel messages
HP Designjet 5100 printer Customer Reference Guide
Warning … supply
ink level? (Error
code 8x09) See
user manual.
If you choose to continue
printing with this ink supply
you will not have an ink level
indicator. You may not know
when the ink supply is running
low or empty. Printing with an
empty ink supply may seriously
damage your printhead, ink
tubes, and printer. See below
for a complete listing of
features that will not be
available with continued use
of this ink supply. Any damage
resulting from use of this
supply or non-HP ink is not
covered under your printer
warranty.
The following features will not
be available as a result of
using this supply.
In the Ink Cartridge menu:
„ Ink level indicator
„ Percentage of ink
remaining
In WebAccess:
„ Ink Cartridges status & Ink
Level
Select Yes to replace it with a genuine
HP 705 cartridge, No to continue.
Warning! Tubes
System has
reached its END
OF LIFE. Contact
HP Representative.
Replace Tubes
System.
The internal ink system inside
your printer has reached the
end of its life.
The ink system tubes have reached the
end of their useful life. Please replace
them before they break and damage
the printer.
WARNING!!! You
are going to reset
the WebAccess
Passwd.
You have a security setting for
WebAccess. This is an
optional setting. If you
continue with the procedure,
the password to gain access to
WebAccess will be reset.
This setting is because you have
forgotten, or do not know the
password for entry into WebAccess.
See the “Using Your Printer” CD for
more details.
You need to cut this
media manually
You have printing material
loaded that is too thick or
strong for the cutter to cut.
Use a knife or scissors to cut the
printing material.
Status Description Procedure