HP IP Distance Gateway - Manual (Page 99)

mpx110 (admin) #> set system
A list of attributes with formatting and current values
will follow. Enter a new value or simply press the
ENTER key to accept the current value.
If you wish to terminate this process before reaching
the end of the list press 'q' or 'Q' and the ENTER key
to do so. System Symbolic Name (Max = 64 characters) [ ] testing
Mode (0=Normal, 1=Transparent, 2=Encap_FC) [0 ]
System Log Level (Min = 0, Max = 3) [0 ]
All attribute values that have been changed will now be saved.
Commands 99