HP IP Distance Gateway - Manual (Page 103)

Show MGMT command
Shows the management port (10/100) configuration.
None Authority
show mgmt Syntax
The following is an example of the show mgmt command: Example
mpx239 (admin) #> show mgmt Management Port Information
-----------------------------
IPv4 Interface Enabled
IPv4 Mode Static
IPv4 IP Address 10.6.7.239
IPv4 Subnet Mask 255.255.248.0
IPv4 Gateway 10.6.4.200
IPv6 Interface Enabled
IPv6 Mode Manual
IPv6 Address 1 2000:10::32:239:1
IPv6 Address 2 ::
IPv6 Link Local fe80::2c0:ddff:fe0d:b279IPv6
Default Router ::
Link Status Up
MAC Address 00-c0-dd-0d-b2-79
Show NTP command
Shows the NTP configuration.
None Authority
show ntp Syntax
The following is an example of the show ntp command: Example
mpx110 #> show ntp
NTP Information -----------------
Mode Disabled
Status Offline
TimeZone Offset (Hours) 0
Commands 103