Reset factory command – HP IP Distance Gateway User Manual

Page 93

Text mode
Original mode

Reset factory command

Restores the mpx110 factory default values. All LUN mappings are deleted, as are all persistent
data regarding targets, LUNS, and initiators. The factory default IP addresses are restored.

Admin session

Authority

reset

Syntax

factory

Restores mpx110 to factory default configuration.

Parameter

The following is an example of the reset factory command:

Example

mpx110 (admin) #> reset factory
Are you sure you want to restore to factory default
settings (y/n): y Please reboot the System for the
settings to take affect.

Commands

This manual is related to the following products:

IP Gateway Upgrade