HP IP Distance Gateway - Manual (Page 70)

Figure 46 Confirm Changes dialog box
6. Read the information. If you want to save a copy of the firmware configuration:
a.
Click Save Configuration to File, browse to the desired directory, enter a file name, and
then click Save.
b. Click Next.
The Security Check dialog box requests the Admin password.
7. Enter the appropriate password, and then click OK to start the firmware update.
The Firmware Update Status dialog box appears, showing the progress of the update in the
message section. When the firmware loads successfully, the Finish dialog box and Update
success dialog box appear. The new firmware will not take effect until the system is rebooted.
Figure 47 Finish dialog box (successful firmware update)
8. To reboot the system, click Yes; otherwise, click No.
9. Click Finish.
70 Using the HP mpx Manager utility