HP IP Distance Gateway - Manual (Page 106)

Show Stats command
Displays mpx110 statistics for FC and iSCSI.
None Authority
show stats Syntax
The following is an example of the show stats command: Example
mpx110 #> show stats
FC Port Statistics
--------------------
FC Port
Interrupt Count
Target Command Count
Initiator Command Count
FC Port
Interrupt Count
Target Command Count
Initiator Command CountiSCSI Port Statistics
-----------------------
iSCSI Port
Interrupt Count
Target Command Count
Initiator Command Count
MAC Xmit Frames
MAC Xmit Byte Count
MAC Xmit Multicast Frames
MAC Xmit Broadcast Frames
MAC Xmit Pause Frames
MAC Xmit Control Frames
MAC Xmit Deferrals
MAC Xmit Late Collisions
MAC Xmit Aborted
MAC Xmit Single Collisions
MAC Xmit Multiple Collisions
MAC Xmit Collisions
MAC Xmit Dropped Frames
MAC Xmit Jumbo Frames
MAC Rcvd Frames
MAC Rcvd Byte Count
MAC Rcvd Unknown Control Frames
MAC Rcvd Pause Frames
MAC Rcvd Control Frames
MAC Rcvd Dribbles
MAC Rcvd Frame Length Errors
MAC Rcvd Jabbers
MAC Rcvd Carrier Sense Errors
MAC Rcvd Dropped Frames
MAC Rcvd CRC Errors
MAC Rcvd Encoding Errors
MAC Rcvd Length Errors Large
MAC Rcvd Small Errors Small
MAC Rcvd Multicast Frames
MAC Rcvd Broadcast Frames
FC Port
FC Port
Interrupt Count
Target Command Count
Initiator Command Count
iSCSI Port 2
Interrupt Count
Target Command Count
Initiator Command Count
106 Command-line interface