HP IP Distance Gateway - Manual (Page 126)

Table 28 FC driver—Error log messages (continued)
Description No. Log message ID
The FC processor failed to
re-initialize in response to an
IOCTL disable request. 97 #%d: QLIoctlDisable: Re-initialize adapter failed 106593
Invalid Virtual Port loop ID 99 #%d: QLUtmReceiveIo: Invalid VP Loop Id 0x%x 106595
The FC processor reported a link
down condition. Table B-10. 307 #%d: QLIsrEventHandler: Link down (%x) 106803
Fibre Channel Driver—Error Log
Messages (Continued) ID Log
Messages No.
The FC processor reported an
unexpected asynchronous event. 317 #%d: QLIsrEventHandler: Unexpected async event (%x),
MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x,
MB7=%x 106813
The mailbox registers provide
status, event code, and data
related to the event.
FCIP Response queue entry TRB
pointer is NULL 350 #%d: QLProcessResponseQueueFS: TRB is NULL: %d 106846
FC firmware failed to respond
to a keep alive command. FC
firmware will be restarted. 355 #%d: QLTimer: Heartbeat failed 106851
The driver has determined that
the FC link is unreliable and 357 #%d: QLTimer: Link error count (0x%x) exceeded, link down 106853
unusable due to the number of
errors encountered. The link has
been taken down.
The FC processor was unable to
obtain the number of loop IDs 416 #%d: QLReserveLoopId: out of loop Ids 106912
required. This failure occurs only
when the FC processor is
running multi-ID firmware.
The driver was unable to
re-establish connection to the 432 #%d: QLMarkDeviceOffline: Device Id: %x marked offline,
cLinkDownTimeout = %x, cPortDownRetryCount=%x 106928
target within the timeout and
retry counts, and is therefore
marking it offline.
The FC processor is unable to
log into the FC fabric name
server. 452 #%d: QLSnsGetAllNext: Name server login FAILED %x 106948
The driver’s host (initiator)
database is full. 533 #%d: QLUpdateDeviceData: out of slots in host database 107029
The driver’s target database is
full. 545 #%d: QLUpdateDeviceDatabase 0x%x: GET_ID failed %x 107041
The driver’s host (initiator)
database is full. Maximum host
database is 64. 560 #%d: QLUpdateDeviceDatabase 0x%x: out of slots in host
database 107056
FC processor “Get VP Database
entry command" failed 562 #%d: QLUpdateDeviceDatabase 0x%x:
MBOX_CMD_GET_VP_DATABASE failed %x 107058
The drivers host (initiator)
database is full. 582 #%d: QLUpdatePort 0x%x: out of slots in host database 107078
No slots available in host
database 758 #%d: QLUpdatePort 0x%x: out of slots in host database 107254
126 Log data