Show performance command, Show properties command, Show performance command show properties command – HP IP Distance Gateway User Manual
Page 104
Show Performance command
Displays performance data.
None
Authority
show perf
Syntax
byte
Shows data transfer rate of each port (FC and GE)
Parameters
init_rbyte
Shows initiator read transfer rate per port
init_wbyte
Shows initiator write transfer rate per port
tgt_rbyte
Shows target read transfer rate per port
tgt_wbyte
Shows target write transfer rate per port
The following is an example of the show perf byte command:
Example
mpx110 #> show performance byteDisplaying bytes/sec
(total)... (Press any key to stop display)GE1 GE2 FC1 FC2
47M 93M 94M 48M
47M 94M 96M 47M
46M 96M 96M 47M
45M 94M 97M 48M
47M 92M 93M 48M
45M 93M 94M 46M
Show Properties command
Shows the CLI properties.
None
Authority
show properties
Syntax
The following is an example of the show properties command:
Example
mpx110 #> show properties
CLI Properties ----------------
Inactivity Timer Disabled
Prompt String QRouter
104 Command-line interface