B-series fibre channel switch parameters – HP IP Distance Gateway User Manual
Page 39

Configuring Fibre Channel switch settings for the mpx110
This section provides HP Fibre Channel switch parameters. Modify the switch settings listed below
based on the switch product line used. All settings apply to HP P9000 and P6000 Continuous
Access unless noted otherwise.
B-series Fibre Channel switch parameters
Execute the commands in
for all switches that will use the FCIP link.
Table 13 Settings for B-series switches
HP storage system
Command
P6000/EVA
P9000/XP
B-Switch# switchdisable
B-Switch# iodset
P10000/3PAR
B-Switch# aptpolicy [1 or 3]
(See NOTE below.)
B-Switch# portcfgislmode [slot/port],1
(Set for all mpx110 connected switch ports, regardless of the storage type)
B-Switch# portcfggport [slot/port],1
(Set for all mpx110 switch ports)
B-Switch# switchenable
Configuring Fibre Channel switch settings for the mpx110
39