Iscsi driver – HP IP Distance Gateway User Manual
Page 114
Table 19 Application modules—Informational log messages (continued)
Description
No.
Log message
ID
Event notification: iSCSI close
connection request or
connection closed.
1691
QLIS_HandleTeb: UTM_EC_CLOSE_CONNECTION or
UTM_EC_CONNECTION_CLOSED
54939
Event notification: iSCSI
connection opened
1692
QLIS_HandleTeb: UTM_EC_CONNECTION_OPENED
54940
Event notification: connection
opened with iSNS server
1693
QLIS_HandleTeb:iSNS Server Open Connection succeeded
54941
Event notification: iSNS SCN
received
1695
QLIS_HandleTeb: UTM_EC_ISNS_SCN
54943
Event notification: iSNS client
discovered.
1697
QLIS_HandleTeb: UTM_EC_ISNS_CLIENT_DISCOVERED
54945
iSCSI close connection request
received
1699
QLIS_HandleTeb: UTM_EC_CLOSE_CONNECTION
54947
iSCSI connection closed
1700
QLIS_HandleTeb: UTM_EC_CONNECTION_CLOSED
54948
Remote system connection
established using DDB d:d
1715
QLIS_SetDdbEntryContinue:[%d:%d] Remote system
connection established
54963
Router iSCSI port xx, operating
as an ISCSI initiator, opened a
connection with an iSCSI target.
1716
QLIS_ConnectionOpenedNotification: Initiator connection
opened (Port %d, DDB %d)
54964
Re-enabling compression
1738
QLIS_HandleSessionTimer: Re-enabling compression
54986
TRB freed, State xx, Abort
Reason d, Flags xx
2051
QLSC_CollectBUVUIO: Freeing dead TRB: State 0x%02X,
AbortReason %d, Flags 0x%02X
55299
iSCSI driver
lists log messages common to both iSCSI ports, 1 (GE1) and 2 (GE2). Log
messages beginning with #0 apply to iSCSI port 1 (GE1), and log messages beginning with #1
apply to iSCSI port 2 (GE2).
Table 20 SCSI driver—Informational log messages
Description
No.
Log message
ID
iSCSI port enabled, port up
331 Restart iSCSI
processor (RISC)
327
#%d: QLPortUp: Set link configuration 0x%x
86343
Restart iSCSI processor
(RISC)
331
#%d: QLDisable: Restart RISC
86347
EEPROM updated, restart
iSCSI processor (RISC)
333
#%d: QLEnable: Restart RISC to update EEPROM
86349
iSCSI port disabled, port
down
336
#%d: QLPortDown: Set link configuration 0x%x
86352
Link up reported by iSCSI
processor for GE1 or GE 2
858
#%d: QLIsrDecodeMailbox: Link up
86874
Not used. To be used on
6200 in outbound offload
code.
1289
#%d: ql4xxx_offload_init: Outbound offload initialization
completed
87305
iSCSI port link-up at
100Mb full-duplex
1330
#%d: QLGetFwStateCallback: link 100Mb FDX
87346
114
Log data