Fcip – HP IP Distance Gateway User Manual
Page 118
Table 22 User modules—Log messages (continued)
Description
No.
Log message
ID
Localmap added for iSCSI initiator
"iqn.dddd-dd.ttt.ttt.ttt......."
354
qapimaptargettoinitiator_1_svc: Localmap added
for initiator %s
151906
Localmap removed for iSCSI
initiator "iqn.dddd-dd.ttt.ttt.ttt......."
355
qapiunmaptargettoinitiator_1_svc: Localmap
removed for initiator %s
151907
User enabled GE port d
356
GE%d: Port status changed by user to ENABLED.
151908
User disabled GE port d
357
GE%d: Port status changed by user to DISABLED.
151909
User enabled FC port d
358
FC%d: Port status changed by user to ENABLED.
151910
User disabled FC port d
359
FC%d: Port status changed by user to DISABLED.
151911
User added FCIP route #d
517
qapisetfcipparams_1_svc: FCIPROUTE %d Added
152069
User modified FCIP route #d
518
qapisetfcipparams_1_svc: FCIPROUTE %d Modified
152070
User removed FCIP route #d
519
qapisetfcipparams_1_svc: FCIPROUTE %d Removed
152071
Initiator configuration changed,
such as CHAP settings or OS type
530
qapiaddmodifyinitiator_1_svc : Initiator
Configuration Changed
152082
User removed an initiator from the
router. Typically this is done using
CLI "initiator rm" command
531
qapiremoveinitiator_1_svc : Initiator Removed
152083
FCIP
lists log messages provided by the FCIP modules.
Table 23 FCIP—Informational log messages
Description
No.
Log message
ID
FCIP Route GigE link d (1 or 2) is
down
204
qlFcip_Linkchange#%d: Gige Link Down
184524
FCIP Route GigE link d (1 or 2) is
up
205
qlFcip_Linkchange#%d: Gige Link Up
184525
118
Log data