HP IP Distance Gateway - Manual (Page 42)

Configuring the FCIP routes using the mpx Manager GUI
1.
Invoke the mpx Manager previously installed on the computer ( Figure 21 (page 42) ).
Figure 21 Connection to mpx Manager
2. Click the Connect icon in the top left corner of the screen.
3. Enter the mpx110 IP address, and then click the Connect button.
4. Select the Wizard menu to run the FCIP Route Add wizard ( Figure 22 (page 42) ).
A warning message appears.
Figure 22 FCIP Route Add wizard
5. Click Yes to continue.
The FC & GigE Port Selection screen appears.
6. Select the FC/GE ports to configure. As an option, you may enter the GE port speed and flow
control parameters. Click Next to continue.
The Local & Remote IP Address screen appears.
42 Installation and upgrades