HP IP Distance Gateway - Manual (Page 87)

Remote IPv6 Address [2000:33::32:2:240]
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal]
TCP Window Size (0=8KB, 1=16KB, 2=32KB) [32768]
Window Scaling (0=Enable, 1=Disable) [Enabled]
Window Scaling Factor (Min=0, Max=7) [7]
TCP Port No. (Min=1024, Max=65535) [3225]
GE Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto]
Bandwidth, Mbit/sec (Min=1, Max=1000) [155]
VLAN (0=Enable, 1=Disable) [Disabled]
FCIP SW Compression (0=Enable, 1=Disable) [Disabled] 0
All attribute values for FCIP Route 2 will now be saved.
mpx239 (admin) #>
The following is an example of the fciproute remove command:
mpx110 (admin) #> fciproute rm
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to
accept the current value. If you wish to terminate this
process before reaching the end of the list press 'q' or 'Q'
and the ENTER key to do so.
WARNING: The following command might cause a loss of
connections to both GE ports.
Route FC Port ID GE Port ID
- — — — — — — — — — — — — —
1FC2 GE2
2FC1 GE1
Please select an FCIP route from the list above ('q' to quit):
1
FCIP Route 1 has been removed from the system.
Commands 87