HP EML E-series Tape Libraries - Manual (Page 105)

Library environmental specifications
Table 30 Library environmental specifications
Measurements Item
Operating Storage Transporting
Temperature
+10 to +35ºC
nl (+50 to +95ºF)
+10 to +40ºC
nl (+50 to +104ºF)
-40 to +60ºC
nl (-40 to +140ºF)
Humidity 20 to 80% 10 to 95% 10 to 95%
Wet bulb (maximum,
noncondensing)
+29.2ºC (+84.5ºF) +35ºC (+95ºF) +35ºC (+95ºF)
Altitude 76 to 4,500 m (-250 to 15,000 ft)
Acoustics
Table 31 Acoustics
Item Operating Idle
Sound power 7.5 Bels (A) 7.5 Bels (A)
Sound pressure Bystander
position
7.5 Bels (A) (60 dB) 7.5 Bels (A)
HP StorageWorks Ultrium tape drive comparisons
Table 32 HP StorageWorks Ultrium tape drive comparisons
Characteristic Ultrium 460 Ultrium 960 Ultrium 1840
Capacity (native) 200 GB 400 GB 800 GB
Transfer rate (native) Up to 30 MB/sec 1 Up to 80 MB/sec 1 Up to 120 MB/sec 1
Data rate matching 10–30 MB/sec 27–80 MB/sec 40–120 MB/sec
Host interfaces 2 Gbps FC 2 Gbps FC 4 Gbps FC
Head channels 8 16 16
Bit density
7.40 Kb/mm (188
Kb/inch)
9.64 Kb/mm (244.9
Kb/inch)
13.52 Kb/mm (343.4
Kb/in)
Number of tracks 512 704 896
Length 609 m 680 m 820 m
WORM support No Yes Yes
Compatibility
Read Ultrium Generation 1, 2
Ultrium Generation 1, 2,
3
Ultrium Generation 2, 3,
4
Write Ultrium Generation 1, 2 Ultrium Generation 2, 3 Ultrium Generation 3, 4
1 HP classifies the performance of the HP StorageWorks Ultrium drives as 1000 x 1000 bytes per second (that is, in base
10) in common with most other disk and tape drive vendors. Most applications, however, measure performance as 1024
x 1024 bytes per second.
Enterprise Modular Library E-Series 105