Figure 50 add path window (for fibre), 50 add path window (for fibre) – HP StorageWorks XP Remote Web Console Software User Manual
Page 98
98
Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
When the Add Path command is selected, the Add Path window is displayed. Use the Add Path window to
set the path(s) to an RCU.
Figure 50
Add Path window (for Fibre)
The MCU-RCU Path box includes:
•
The MCU Port boxes, which you use to enter the MCU port number. The Initiator and the RCP are listed
in the list and can be selected.
•
The RCU Port boxes, which you use to enter the RCU port number. The RCU Target port must be
specified.
•
The Link Address boxes, which you use to enter the Link Address.
The Cancel button cancels the settings you made. The Set button applies the settings you made and
changes the list.
NOTE:
The number of effectively displayed boxes depends on the number of paths that can be added.
For more information on the path status, see
To add a new logical path from the connected MCU to an existing RCU:
1.
From the CU Number tree on the RCU Operations window, verify the correct CU image is selected.
2.
From the MCU/RCU list on the RCU Operations window, select the RCU to which you want to add a
path.