HP StorageWorks XP Remote Web Console Software - Manual (Page 122)

122 Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
• Snapshot: Creates the snapshot file (see ” Snapshot function ” on page 71).
Figure 66 TrueCopy main window (Pair Operations window)
4. Select a command and use the window to make your settings.
5. Click Set.
NOTE: The options can be modified and/or canceled after you have set them. See ” Modifying
parameters and omitting selected volumes ” on page 122.
6. Click Apply on the TrueCopy main window.
The status of the command (active or inactive) depends on the status of the volumes selected in the Volume
list.
The following sections describe in detail for each command and operation.
List after the command selection
After the window is closed, only the Volumes selected in step 2 of the procedure described in the
” Common procedure for TrueCopy pair operation ” on page 121 are displayed in the list. The items of the
list are also changed. The Volume list that is in this status is called the Pair Settings Parameter list. The items
of the Pair Settings Parameter list depend on the command selected from the pop-up menu and the
operation you performed. The items for each command are described in the sections.
Use the Set button on each parameter window to preset the parameters to the Pair Settings Parameter list.
To apply the parameters to the system, click Apply on the TrueCopy main window.
The Cancel button closes the window, but does not set the parameters. The Cancel All button returns you to
the Volume list.
Modifying parameters and omitting selected volumes
After the pair settings operation, the volume parameters can be modified individually. Also the volumes
that are selected to be the pairs can be omitted from the pair operation.
To modify the parameters of a volume:
1. Select a volume whose parameters to be modified on the Pair Settings Parameter list.